Static eliminator bar Electrostatic control in film rewinding
process
problem
Film extrusion or film blowing lines usually have very high static
electricity exceeding 200kV, which can cause the following
problems:
Operators suffer from electric shock, causing discomfort
High static film sound production of film roll
Attract dust more than one meter away and pollute the finished
product
Solution
The selection of equipment depends on the design of the machine,
space constraints, etc. Qp-es electrostatic rod can blow the air
stream with ions to the product surface. After the ion wind is
blown out of the fan, an ionosphere with a width covering the full
length of the product and a depth reaching the reel is formed in a
certain area to effectively neutralize the static electricity in
the area. At the same time, a fan filter device can be provided to
ensure the cleanness of the blown air.
Features:
1, Prevent electric shock design,use of safe；
2, High strength alloy material with fine appearance；
3, Excellent destatic performance, widely applicable scope;
4, Using special technology to isolate the electrode, the
electrostatic performance is better.
Performance Parameters:
| TYPE | QP-ES |
| Working voltage | MAX 7Kv AC |
| Working current | MAX 5mA |
| working frequency | 50/60Hz |
| operation mode | Power frequency AC |
| Working distance | 3~15cm |
| Recommended installation distance | 3~5cm |
| Discharge electrode spacing | 25mm |
| Discharge electrode material | SS. / W |
| length | 80~4000mm |
| working temperature | 0~50℃ |
| Temperature (23 ± 3) ℃; Humidity (50 ± 5)%; Test voltage ± 1kV ~ ±
100V; |
| test instrumentation:CPM374 |
Application field:
Electronic
Photoelectric
Printing
Plastic
Textile and other industries
Use and installation
(1) Choose an optimal position and fix the ion bar and adaptor
tightly.
(2) Connect two ends of power cable with adaptor and ion bar.
(3) Connect the ground end on the bar body to the ground bolt on
the power
(4) Switch on the power and set proper parameters.
Shanghai qipu electrostatic technology co., LTD is located in D5
NO.508 Dongye Road Dongjing Songjiang Shanghai, is a set of static
control equipment & corona treatment machine research and
development, manufacturing, sales and service in one of the
high-tech enterprises. The product of the company's main research
and development is: electrostatic eliminator bar,corona treater,
ion air bar, high voltage generator, ionizing air blower,static
field meter ,static sensor,Electrostatic electret equipment and so
on.
FAQs
Q: Are you trading company or manufacturer?
A: Yes, we are factory, all machine is made by ourselves and we can
provide customize service according to your requirement. We have
production line, R&D department, QC department, sales and
after-sales service department and so on.
Q: How long is your delivery time?
A: Generally, it is 1-3 day if the goods are in stock. And it is
about 3 to 7 days if the goods are not in stock, it depends on your
quantity requirement.
Q: Is this machine easy to use and if we have no experience to use
it, can we operate it well?
A: Yes, our machine is intended to designed easier operation for
you. We can provide machine videos or pictures to you; it can help
us how to operate it well.
